Atmospheric reactivity of biogenic volatile organic compounds in a maritime pine forest during the LANDEX episode 1 field campaign.

Trace gas measurements were performed during the LANDEX (the LANDes EXperiment) Episode 1 field campaign in the summer 2017, in one of the largest European maritime pine forests (> 95% Pinus pinaster) located in southwestern France. Efforts have been focused on obtaining a good speciation of 20 major biogenic volatile organic compounds (BVOCs, including pinenes, carenes, terpinenes, linalool, camphene, etc.). This was made possible by the development of a new and specific chromatographic method. In order to assess the role of BVOCs in the local gas phase chemistry budget, their reactivity with the main atmospheric oxidants (hydroxyl radicals (OH), ozone (O3) and nitrate radicals (NO3)) and the corresponding consumption rates were determined. When considering the OH reactivity with BVOCs, isoprene and linalool accounted for 10-47% of the OH depletion during daytime, and monoterpenes for 50-65%, whereas monoterpenes were the main contributors during the night (70-85%). Sesquiterpenes and monoterpenes were the main contributors to the ozone reactivity, especially ß-caryophyllene (30-70%), with a maximum contribution during nighttime. Nighttime nitrate reactivity was predominantly due to monoterpenes (i.e. 90-95%). Five specific groups have been proposed to classify the 19 BVOCs measured in the forest, according to their reactivity with atmospheric oxidants and their concentrations. The total amount of BVOCs consumed under and above the forest canopy was evaluated for 7 BVOCs (i.e. isoprene, α-pinene, ß-pinene, myrcene, limonene + cis-ocimene and Δ3-carene). The reactivity of atmospheric oxidants and BVOCs at a local level are discussed in order to highlight the compounds (BVOCs, other VOCs), the atmospheric oxidants and the main associated reactive processes observed under the canopy of a maritime pine forest.

Secondary Organic Aerosol Formation from Aromatic Alkene Ozonolysis: Influence of the Precursor Structure on Yield, Chemical Composition, and Mechanism.

The influence of the precursor chemical structure on secondary organic aerosol (SOA) formation was investigated through the study of the ozonolysis of two anthropogenic aromatic alkenes: 2-methylstyrene and indene. Experiments were carried out in three different simulation chambers: ICARE 7300L FEP Teflon chamber (ICARE, Orléans, France), EUPHORE FEP Teflon chamber (CEAM, Valencia, Spain), and CESAM evacuable stainless steel chamber (LISA, Créteil, France). For both precursors, SOA yield and growth were studied on a large range of initial concentrations (from ∼60 ppbv to 1.9 ppmv) and the chemical composition of both gaseous and particulate phases was investigated at a molecular level. Gas phase was described using FTIR spectroscopy and online gas chromatography coupled to mass spectrometry, and particulate chemical composition was analyzed (i) online by thermo-desorption coupled to chemical ionization mass spectrometry and (ii) offline by supercritical fluid extraction coupled to gas chromatography and mass spectrometry. The results obtained from a large set of experiments performed in three different chambers and using several complementary analytical techniques were in very good agreement. SOA yield was up to 10 times higher for indene ozonolysis than for 2-methylstyrene ozonolysis at the same reaction advancement. For 2-methylstyrene ozonolysis, formaldehyde and o-tolualdehyde were the two main gaseous phase products while o-toluic acid was the most abundant among six products detected within the particulate phase. For indene ozonolysis, traces of formic and phthalic acids as well as 11 species were detected in the gaseous phase and 11 other products were quantified in the particulate phase, where phthaldialdehyde was the main product. On the basis of the identified products, reaction mechanisms were proposed that highlight specific pathways due to the precursor chemical structure. These mechanisms were finally compared and discussed regarding SOA formation. In the case of 2-methylstyrene ozonolysis, ozone adds mainly on the external and monosubstituted double bond, yielding only one C8- and monofunctionalized Criegee intermediate and hence more volatile products as well as lower SOA mass than indene ozonolysis in similar experimental conditions. In the case of indene, ozone adds mainly on the five-carbon-ring and disubstituted C═C double bond, leading to the formation of two C9- and bifunctionalized Criegee intermediates, which then evolve via different pathways including the hydroperoxide channel and form highly condensable first-generation products.

Speciation of organic fraction does matter for source apportionment. Part 1: A one-year campaign in Grenoble (France).

PM10 source apportionment was performed by positive matrix factorization (PMF) using specific primary and secondary organic molecular markers on samples collected over a one year period (2013) at an urban station in Grenoble (France). The results provided a 9-factor optimum solution, including sources rarely apportioned in the literature, such as two types of primary biogenic organic aerosols (fungal spores and plant debris), as well as specific biogenic and anthropogenic secondary organic aerosols (SOA). These sources were identified thanks to the use of key organic markers, namely, polyols, odd number higher alkanes, and several SOA markers related to the oxidation of isoprene, α-pinene, toluene and polycyclic aromatic hydrocarbons (PAHs). Primary and secondary biogenic contributions together accounted for at least 68% of the total organic carbon (OC) in the summer, while anthropogenic primary and secondary sources represented at least 71% of OC during wintertime. A very significant contribution of anthropogenic SOA was estimated in the winter during an intense PM pollution event (PM10>50µgm-3 for several days; 18% of PM10 and 42% of OC). Specific meteorological conditions with a stagnation of pollutants over 10days and possibly Fenton-like chemistry and self-amplification cycle of SOA formation could explain such high anthropogenic SOA concentrations during this period. Finally, PMF outputs were also used to investigate the origins of humic-like substances (HuLiS), which represented 16% of OC on an annual average basis. The results indicated that HuLiS were mainly associated with biomass burning (22%), secondary inorganic (22%), mineral dust (15%) and biogenic SOA (14%) factors. This study is probably the first to state that HuLiS are significantly associated with mineral dust.

One-year study of polycyclic aromatic compounds at an urban site in Grenoble (France): Seasonal variations, gas/particle partitioning and cancer risk estimation.

21 PAHs, 27 oxy-PAHs and 32 nitro-PAHs were measured every third day over a year in both gaseous (G) and particulate PM10 (P) phases in ambient air of Grenoble (France). Mean total concentrations (G+P) of PAHs and oxy-PAHs were in the same range and about 10ngm(-3). Nitro-PAHs were 50 to 100 times less concentrated averaging 100pgm(-3). Polycyclic aromatic compound (PAC) concentrations were 5 to 7 times higher in "cold" period (October to March) than in "warm" period (April to September). Seasonal variations may be explained by higher primary emissions from residential heating, especially biomass burning in "cold" season. Meteorological conditions and influence of the geomorphology around Grenoble, with the formation of thermal inversion layers leading to the stagnation of pollutants, were additional key parameters. Maximum individual PAC concentrations were observed during two PM10 pollution events in December and February-March. Chemical processes and secondary formation of oxy- and nitro-PAH were probably enhanced by the accumulation of the pollutants during these events. PAC gas/particle partitioning depended on compound molecular weight and vapour pressure. Gas/particle partitioning of oxy- and nitro-PAHs were evaluated using a multi-phase poly-parameter linear free energy relationship model. The PAC cancer risk was assessed using toxic equivalency factors available in the literature (19 PAHs, 10 nitro-PAHs and 1 oxy-PAH). Overall, particle-bound PACs contributed about 76% of the cancer risk. While PAHs accounted for most of the total PAC cancer risk, oxy- and nitro-PAHs could account for up to 24%. The risk quantification across substance classes is limited by toxicological data availability.

Gas- and Particle-Phase Products from the Chlorine-Initiated Oxidation of Polycyclic Aromatic Hydrocarbons.

The chlorine atom (Cl)-initiated oxidation of three polycyclic aromatic hydrocarbons (PAHs; namely, naphthalene, acenaphthylene, and acenaphthene) was investigated. Experiments were performed in an atmospheric simulation chamber using a proton transfer reaction time-of-flight mass spectrometer (TOF-MS) and an aerosol TOF-MS to characterize the oxidation products in the gas and particle phases, respectively. The major products identified from the reaction of Cl atoms with naphthalene were phthalic anhydride and chloronaphthalene, indicating that H atom abstraction and Cl addition reaction pathways are both important. Acenaphthenone was the principal product arising from reaction of Cl with acenaphthene, while 1,8-naphthalic anhydride, acenaphthenone, acenaphthenequinone, and chloroacenaphthenone were all identified as products of acenaphthylene oxidation, confirming that the cylcopenta-fused ring controls the reactivity of these PAHs toward Cl atoms. Possible reaction mechanisms are proposed for the formation of these products, and favored pathways have been suggested. Large yields of secondary organic aerosol (SOA) were also observed in all experiments, and the major products were found to undergo significant partitioning to the particle-phase. This work suggests that Cl-initiated oxidation could play an important role in SOA formation from PAHs under specific atmospheric conditions where the Cl atom concentration is high, such as the marine boundary layer.

Evidence for an unrecognized secondary anthropogenic source of organosulfates and sulfonates: gas-phase oxidation of polycyclic aromatic hydrocarbons in the presence of sulfate aerosol.

In the present study, formation of aromatic organosulfates (OSs) from the photo-oxidation of polycyclic aromatic hydrocarbons (PAHs) was investigated. Naphthalene (NAP) and 2-methylnaphthalene (2-MeNAP), two of the most abundant gas-phase PAHs and thought to represent "missing" sources of urban SOA, were photochemically oxidized in an outdoor smog chamber facility in the presence of nonacidified and acidified sulfate seed aerosol. Effects of seed aerosol composition, acidity and relative humidity on OS formation were examined. Chemical characterization of SOA extracts by ultra performance liquid chromatography coupled to electrospray ionization high-resolution quadrupole time-of-flight mass spectrometry revealed the formation of OSs and sulfonates from photo-oxidation in the presence of sulfate seed aerosol. Many of the organosulfur compounds identified in the smog chamber extracts were also measured in urban fine aerosol collected at Lahore, Pakistan, and Pasadena, USA, demonstrating that PAH photo-oxidation in the presence of sulfate aerosol is a hitherto unrecognized source of anthropogenic secondary organosulfur compounds, and providing new PAH SOA tracers.

Photochemical aging of secondary organic aerosols generated from the photooxidation of polycyclic aromatic hydrocarbons in the gas-phase.

Aging processes of secondary organic aerosol (SOA) may be a source of oxygenated organic aerosols; however, the chemical processes involved remain unclear. In this study, we investigate photochemical aging of SOA produced by the gas-phase oxidation of naphthalene by hydroxyl radicals and acenaphthylene by ozone. We monitored the SOA composition using a high-resolution time-of-flight aerosol mass spectrometer. We initiated SOA aging with UV photolysis alone and with OH radicals in the presence or absence of light and at different NOx levels. For naphthalene, the organic composition of the particulate phase seems to be dominated by highly oxidized compounds such as carboxylic acids, and aging data may be consistent with diffusion limitations. For acenaphthylene, the fate of oxidized products and the moderately oxidized aerosol seem to indicate that functionalization reactions might be the main aging process were initiated by the cumulative effect of light and OH radicals.

Kinetics of the gas-phase reactions of chlorine atoms with naphthalene, acenaphthene, and acenaphthylene.

Reactions of polycyclic aromatic hydrocarbons (PAHs) with chlorine atoms may occur in specific areas such as coastal regions and the marine boundary layer. In this work, rate constants for the gas-phase reactions of naphthalene, acenaphthene, and acenaphthylene with chlorine atoms have been measured using the relative rate technique. Experiments were performed at room temperature (293 ± 2 K) and atmospheric pressure in an atmospheric simulation chamber using a proton-transfer reaction mass spectrometer (PTR-MS) to monitor the concentrations of PAHs and the reference compounds (acetone, methanol, 1,3,5-trimethylbenzene, and isoprene) as a function of time. The rate constants obtained in this work were (in units of cm(3) molecule(-1) s(-1)) (4.22 ± 0.46) × 10(-12), (3.01 ± 0.82) × 10(-10), and (4.69 ± 0.82) × 10(-10) for naphthalene, acenaphthene, and acenaphthylene, respectively. These are the first measurements of the rate constants for gas-phase reactions of Cl atoms with acenaphthene and acenaphthylene. The rate constant determined in this study for the reaction of naphthalene with Cl atoms is not in agreement with the only other previously reported value in the literature. The results are used to assess the potential role of chlorine atom reactions in the atmospheric oxidation of PAHs.

A new device for formaldehyde and total aldehydes real-time monitoring.

A new sensitive technique for the quantification of formaldehyde (HCHO) and total aldehydes has been developed in order to monitor these compounds, which are known to be involved in air quality issues and to have health impacts. Our approach is based on a colorimetric method where aldehydes are initially stripped from the air into a scrubbing solution by means of a turning coil sampler tube and then derivatised with 3-methylbenzothiazolinone-2-hydrazone in acid media (pH = -0.5). Hence, colourless aldehydes are transformed into blue dyes that are detected by UV-visible spectroscopy at 630 nm. Liquid core waveguide LCW Teflon® AF-2400 tube was used as innovative optical cells providing a HCHO detection limit of 4 pptv for 100 cm optical path with a time resolution of 15 min. This instrument showed good correlation with commonly used techniques for aldehydes analysis such as DNPH derivatisation chromatographic techniques with off-line and on-line samplers, and DOAS techniques (with deviation below 6%) for both indoor and outdoor conditions. This instrument is associated with simplicity and low cost, which is a prerequisite for indoor monitoring.

Analysis of polycyclic aromatic hydrocarbons adsorbed on particles of atmospheric interest using pressurised fluid extraction.

Pressurised fluid extraction (PFE) was used for the measurement of 13 polycyclic aromatic hydrocarbons (PAHs) adsorbed on different types of particles: two model particles (PAH-coated silica, PAH-coated graphite) and two natural atmospheric particles (urban dust and diesel exhaust, from NIST reference materials). Samples were analysed by gas chromatography coupled to mass spectrometry. Extraction efficiency was evaluated with internal standard recovery yields and was shown to depend on the nature of the particle, on the structure of the analytes and on the PAH concentration. Extraction conditions (toluene, 130 degrees C, 130 bar, 2 x 8-min static cycles) were optimised to extract PAHs when strongly interacting with solid matrices and were validated by the analysis of two PAH-certified materials.